for more information please call 1-800-belden1 general description: 18 awg solid .040" bare copper-covered steel conductor, gas-injected foam polyethylene insulation, duobond? iv quad shield (60% and 40% coverage), pvc jacket. physical characteristics (overall) conductor awg: # coax awg stranding conductor material dia. (mm) 1 18 solid bccs - bare copper covered steel 1.016 total number of conductors: 1 insulation insulation material: insulation material dia. (mm) gas-injected fpe - foam polyethylene 4.572 outer shield outer shield material: layer # outer shield trade name type outer shield material coverage (%) 1 bonded duofoil? tape bonded aluminum foil-polyester tape-aluminum foil 100 2 braid al - aluminum 60 3 duofoil? tape aluminum foil-polyester tape-aluminum foil 100 4 braid al - aluminum 40 outer jacket outer jacket material: outer jacket material pvc - polyvinyl chloride overall cable overall nominal diameter: 7.468 mm mechanical characteristics (overall) operating temperature range: -40c to +80c bulk cable weight: 43.158 kg/km max. recommended pulling tension: 720.608 n min. bend radius/minor axis: 76.200 mm applicable specifications and agency compliance (overall) applicable standards & environmental programs nec/(ul) specification: cm cec/c(ul) specification: cm eu directive 2011/65/eu (rohs ii): yes eu ce mark: yes eu directive 2000/53/ec (elv): yes eu directive 2002/95/ec (rohs): yes page 1 of 3 04-30-2013 detailed specifications & technical data metric measurement version 1189a coax - broadband catv coax cable
eu rohs compliance date (mm/dd/yyyy): 01/01/2004 eu directive 2002/96/ec (weee): yes eu directive 2003/11/ec (bfr): yes ca prop 65 (cj for wire & cable): yes mii order #39 (china rohs): yes series type: series 6 flame test ul flame test: ul1685 ul loading plenum/non-plenum plenum (y/n): no plenum number: 1189ap electrical characteristics (overall) nom. characteristic impedance: impedance (ohm) 75 nom. inductance: inductance (h/m) 0.318257 nom. capacitance conductor to shield: capacitance (pf/m) 53.1522 nominal velocity of propagation: vp (%) 83 nominal delay: delay (ns/m) 3.9372 nom. conductor dc resistance: dcr @ 20c (ohm/km) 91.868 nominal outer shield dc resistance: dcr @ 20c (ohm/km) 15.7488 max. attenuation: freq. (mhz) attenuation (db/100m) 5 2.19827 55 5.2496 211 9.41647 270 10.6304 300 11.2538 350 12.2053 400 13.124 450 13.9771 550 15.4535 750 18.3408 870 19.686 1000 21.4577 max. operating voltage - ul: voltage 300 v rms page 2 of 3 04-30-2013 detailed specifications & technical data metric measurement version 1189a coax - broadband catv coax cable
minimum structural return loss: description freq. (mhz) start freq. (mhz) stop freq. (mhz) min. srl (db) 5 1000 20 sweep test sweep testing: 5 mhz - 1 ghz put ups and colors: item # putup ship weight color notes item desc 1189a 009u1000 305 mt 15.422 kg white #18 gifhdldpe dbl sh pvc 1189a 009u500 152 mt 8.165 kg white #18 gifhdldpe dbl sh pvc 1189a 0091000 305 mt 15.422 kg white c #18 gifhdldpe dbl sh pvc 1189a 010u1000 305 mt 15.422 kg black #18 gifhdldpe dbl sh pvc . 1189a 010u500 152 mt 8.165 kg black #18 gifhdldpe dbl sh pvc 1189a 0101000 305 mt 15.422 kg black #18 gifhdldpe dbl sh pvc . 1189a 0105000 1,524 mt 83.915 kg black #18 gifhdldpe dbl sh pvc 1189a 2901000 305 mt 15.422 kg beige, light #18 gifhdldpe dbl sh pvc notes: c = crate reel put-up. revision number: 4 revision date: 08-09-2012 ? 2013 belden, inc all rights reserved. although belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. belden provides the information and specifications herein on an "as is" basis, with no representations or warranties, whether express, statutory or implied. in no event will belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. all sales of belden products are subject to belden's standard terms and conditions of sale. belden believes this product to be in compliance with eu rohs (directive 2002/95/ec, 27-jan-2003). material manufactured prior to the compliance date may be in stock at belden facilities and in our distributors inventory. the information provided in this product disclosure, and the identification of materials listed as reportable or restricted within the product disclosure, is correct to the best of beldens knowledge, information, and belief at the date of its publication. the information provided in this product disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. this product disclosure is not to be considered a warranty or quality specification. regulatory information is for guidance purposes only. product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. belden declares this product to be in compliance with eu lvd (low voltage directive 73/23/eec), as amended by directive 93/68/eec. page 3 of 3 04-30-2013 detailed specifications & technical data metric measurement version 1189a coax - broadband catv coax cable
|
